自动修改本机IP地址的bat代码

    代码比较多,经过lingkb小编测试,在2008 r2上无法正常执行,其实bat设置ip就是几个命令,无外乎加了一些判断与获取原来网络配置的一些信息,代码越复杂越容易出问题

    
    @echo off
    setlocal enabledelayedexpansion
    title 修改本机IP地址 by:小小沧海20130409
    :init
    cls&echo ——————————————自动修改本机IP地址——————————————
    rem 系统版本,值可为Windows7或是WindowsXP,或是auto(表示自动获取)
    set SYSVER=auto
    rem 要更改的网卡名称,auto表示自动获取第一块“以太网适配器”
    set ETH=auto
    rem IP来源,值仅为两个static和dhcp,ques表示询问,由使用者填写
    rem 静态IP请填写static,从网关自动获取IP请填写dhcp
    set IPSOURCE=ques
    rem 要改成的IP地址,ques同上
    set IPADDR=ques
    rem 要改成的子网掩码,ques同上
    set MASK=ques
    rem 要使用的默认网关,ques同上
    set GATEWAY=ques
    rem DNS模式,值仅为两个static和dhcp
    rem 静态DNS请填写static,从网关自动获取DNS请填写dhcp
    set DNSSOURCE=ques
    rem 要使用的首选DNS,ques同上
    set DNS1=ques
    rem 要使用的备用DNS,ques同上
    set DNS2=ques
    set LOG=%TEMP%\changeIP_log.txt
    echo 运行日期:%date% %time%>%LOG%
    
    
    :start
    rem ===============使用者填写参数值=======================
    rem 自动获取系统版本,结果为 Windows7 或是 WindowsXP(只测试了这两个系统)
    if "%SYSVER%"=="auto" (
      set /p=正在自动获取系统版本...<nul
      for /f "skip=1 tokens=2-3 delims= " %%i in ('wmic os get caption') do set SYSVER=%%i%%j
      if /i "!SYSVER!"=="Windows7" (
        echo 成功![Win7]
      ) else (
        if /i "!SYSVER!"=="WindowsXP" (
          echo 成功![WinXP]
        ) else (
          echo [!SYSVER!]
          echo 【注意】非Win7和XP系统不保证能执行成功!&pause>nul
        )
      )
    )
    
    rem 自动获取网卡名称
    if "%ETH%"=="auto" (
      echo 正在自动获取网络适配器信息...
      set index=0
      set select=1
      for /f "skip=3 tokens=4* delims= " %%i in ('netsh interface ipv4 show interfaces^|find /i /v "Loopback"') do (
        set /a index=!index!+1
        set ethname=%%j
        echo [!index!]!ethname!
      )
      if !index!==1 (
        set ETH=!ethname!
      ) else ( if !index! GTR 1 (
        :select
        set /p=请选择要设置的网卡编号:<nul
        set select=0&set /p select=
        if /i !select! LSS 1 goto select
        if /i !select! GTR !index! goto select
        set index=0
        for /f "skip=3 tokens=4* delims= " %%i in ('netsh interface ipv4 show interfaces^|find /i /v "Loopback"') do (
          set /a index=!index!+1
          if !index!==!select! (
            set ETH=%%j
          )
        )
      ))
    
      if "!ETH!"=="auto" (
        echo 自动获取网卡名称失败,请右键编辑本批处理,手动填写网卡名称!&pause>nul&exit
      ) else (
        rem set/p=[!ETH!]<nul
        echo 成功!
      )
    )
    
    :quesIP
    if "%IPSOURCE%"=="ques" (
      echo →请填写【IP地址来源】^(值仅为两个static和dhcp,直接回车为static^)
      set /p IPSOURCE=
      if "!IPSOURCE!"=="ques" set IPSOURCE=static
      if /i "!IPSOURCE!" NEQ "static" (if /i "!IPSOURCE!" NEQ "dhcp" (
        set IPSOURCE=static
        echo IP来源填写错误,将变更为static模式
        pause>nul
      ))
    )
    if /i "%IPSOURCE%"=="dhcp" goto quesDNS
    
    if "%IPADDR%"=="ques" (
      echo →请填写【IP地址】^(直接回车为192.168.1.100^)
      set /p IPADDR=
      if "!IPADDR!"=="ques" set IPADDR=192.168.1.100
    )
    
    if "%MASK%"=="ques" (
      echo →请填写【子网掩码】^(直接回车为255.255.255.0^)
      set /p MASK=
      if "!MASK!"=="ques" set MASK=255.255.255.0
    )
    
    if "%GATEWAY%"=="ques" (
      echo →请填写【默认网关】^(直接回车为192.168.1.1^)
      set /p GATEWAY=
      if "!GATEWAY!"=="ques" set GATEWAY=192.168.1.1
    )
    
    :quesDNS
    if "%DNSSOURCE%"=="ques" (
      echo →请填写【DNS来源】^(值仅为两个static和dhcp,直接回车为static^)
      set /p DNSSOURCE=
      if "!DNSSOURCE!"=="ques" set DNSSOURCE=static
      if /i "!DNSSOURCE!" NEQ "static" (if /i "!DNSSOURCE!" NEQ "dhcp" (
        set DNSSOURCE=static
        echo DNS来源填写错误,将变更为static模式
        pause>nul
      ))
    )
    if /i "%DNSSOURCE%"=="dhcp" goto checkInfo
    
    if "%DNS1%"=="ques" (
      echo →请填写【首选DNS地址】^(直接回车为8.8.8.8^)
      set /p DNS1=
      if "!DNS1!"=="ques" set DNS1=8.8.8.8
    )
    
    if "%DNS2%"=="ques" (
      echo →请填写【备用DNS地址】^(直接回车为8.8.4.4^)
      set /p DNS2=
      if "!DNS2!"=="ques" set DNS2=8.8.4.4
    )
    
    
    :checkInfo
    cls
    echo 即将应用以下配置:
    call :showInfo
    echo 请确认信息是否正确,输入Y继续,输入N退出,输入Q显示本机网络信息
    set choose=nul&set /p choose=
    if /i "%choose%"=="nul" goto checkInfo
    if /i "%choose%"=="N" exit
    if /i "%choose%"=="Q" call :getInfo & pause & goto checkInfo
    if /i "%choose%" NEQ "Y" goto checkInfo
    echo ★注意★请关闭防火墙或允许所有弹出的安全软件提示,否则无法成功执行!
    
    :changeIP
    rem 通过dhcp删除原有IP配置
    echo →设置"%ETH%"的IP源为DHCP,以删除原有IP地址 >>%LOG%
    netsh -c interface ip set address name="%ETH%" source=dhcp >>%LOG%
    if /i "%IPSOURCE%"=="static" (
      echo →设置IP为"%IPADDR%",掩码为"%MASK%",网关为"%GATEWAY%" >>%LOG%
      netsh -c interface ip set address name="%ETH%" source=static address="%IPADDR%" mask="%MASK%" gateway="%GATEWAY%" gwmetric=1 >>%LOG%
    )
    rem 删除原有DNS配置
    echo →删除原有DNS配置 >>%LOG%
    netsh -c interface ip delete dns "%ETH%" all >>%LOG%
    if /i "%DNSSOURCE%"=="static" (
      echo →设置首选DNS为%DNS1% >>%LOG%
      netsh -c interface ip add dns name="%ETH%" addr="%DNS1%" index=1 >>%LOG%
      echo →设置备用DNS为%DNS2% >>%LOG%
      netsh -c interface ip add dns name="%ETH%" addr="%DNS2%" index=2 >>%LOG%
      rem ↑此处可继续增加多个DNS服务器地址
    ) else (if /i "%DNSSOURCE%"=="dhcp" (
      echo →设置DNS为DHCP模式 >>%LOG%
      netsh -c interface ip set dns name="%ETH%" dhcp >>%LOG%
    ))
    
    :end
    cls
    rem echo 【要设定的信息】
    rem call :showInfo
    echo 【当前本机信息】
    call :getInfo
    echo ======================================
    echo 如果上下一致则说明修改成功!
    echo 如果不一致则请查看日志文件!
    echo 输入L查看日志文件,输入E退出程序。
    set choose=nul&set /p choose=
    if /i "%choose%"=="L" start %LOG%&goto end
    if /i "%choose%"=="E" exit
    if /i "%choose%"=="nul" goto end
    
    
    echo 程序执行结束,按任意键退出...
    pause>nul
    exit
    
    
    :showInfo
    echo 【本机系统】:%SYSVER%
    echo 【网卡名称】:%ETH%
    echo 【IP来源 】:%IPSOURCE%
    if "%IPSOURCE%"=="static" (
      echo 【IP地址 】:%IPADDR%
      echo 【子网掩码】:%MASK%
      echo 【默认网关】:%GATEWAY%
    )
    echo 【DNS来源 】:%DNSSOURCE%
    if "%DNSSOURCE%"=="static" (
      echo 【首选DNS 】:%DNS1%
      echo 【备用DNS 】:%DNS2%
    )
    rem goto :eof等于返回return
    goto :eof
    
    
    :getInfo
    netsh -c interface ip show address name="%ETH%"
    netsh -c interface ip show dns name="%ETH%"
    goto :eof
    
    :windows7
    
    ==============================================
    接口 "本地连接" 的配置
      DHCP 已启用:            否
      IP 地址:              192.168.1.253
      子网前缀:             192.168.1.0/24 (掩码 255.255.255.0)
      默认网关:             192.168.1.1
      网关跃点数:            1
      InterfaceMetric:          20
      
      
    接口 "本地连接" 的配置
      静态配置的 DNS 服务器:      8.8.8.8
                       8.8.4.4
      用哪个前缀注册:          只是主要

    BAT批处理复杂环境下的IP地址修改设置

    
    @echo off
    mode con cols=70 lines=38
    color a
    title D-小苏-学习-Bat-快速修改本地IP地址
    :ShowReadme
    cls
    echo.
    echo *********************学习-Bat-快速修改本地IP地址**********************
    echo.
    echo 实现功能(以下情况下测试通过):
    echo 1.多连接名称:自动获取网络连接名称
    echo 2.多连接属性:有线连接,无线连接,虚拟连接
    echo 3.多操作系统:Windows XP,Windows 7 / 8.1
    echo 4.多网络连接:无线连接2个,有线连接1个,VMware连接2个
    echo 5.区域的DNS:判断计算机可以连接互联网则采用当前DNS设置
    echo 6.空格名称:VMware Virtual Ethernet Adapter for VMnet1
    echo 7.优化设置:优化选择步骤,添加选择序号,保存配置内容
    echo 8.设置方法:可转换Netsh interface ip set 和WMIC nicconfig 
    echo 9.获取优化:判断网关值,存储有效的网关值以打开路由器设置页
    echo.
    echo *********************学习-Bat-快速修改本地IP地址**********************
    ping -n 1 127.1 >nul
    :Set_localTemp
    setlocal enabledelayedexpansion
    ver | find "6." > NUL &&(cls&echo. &echo -------------------------------当前系统为 Windows 7以上系统 &Set "WindowsVer=Windows 7" &goto :Set_NetConnectionID)
    cls&echo. &echo -------------------------------当前系统不是 Windows 7以上系统 &Set "WindowsVer=WindowsXP" &goto :Set_NetConnectionID
    :Set_NetConnectionID
    rem 获取设置网络连接名称
    cls
    echo.
    echo *************选择网络连接名称*****************IN %WindowsVer%**********
    echo.
    set "str=DefaultIPGateway^,IPAddress^,DNSServerSearchOrder^,IPSubnet^,DHCPEnabled"
    for /f "skip=1tokens=1*" %%i in ('wmic Nic where "Manufacturer<>'Microsoft' and NetConnectionStatus='2'" get Index^,NetConnectionID^') do (
      for /f "tokens=1* delims=:" %%j in ("%%j") do (
        set $%%i=%%j
    Echo %%i_%%j>>适配器_Index_Name.txt
    echo. 
    echo 适配器_ID_Index: %%i 
    echo 适配器_名_NName: %%j
        for /f "tokens=1-3delims={}," %%a in ('wmic Nicconfig where "Index='%%i'" get %str% /value') do (
          for /f %%c in (%%c) do if /i "%%a" == "DNSServerSearchOrder=" set "DNS2=%%c"
          for /f %%c in ("%%a%%~b") do set "%%c"
        )
        if /i "!DHCPEnabled!" == "TRUE" (
         echo 适配器_IP_模式 : 自动
        ) else echo 适配器_IP_模式 : 手动 
    IF not defined Net_IP set Net_IP=!IPAddress! 
    echo 适配器_IP_地址 : !IPAddress! Net_IP_地址 : !Net_IP!
    IF not defined Net_MASK set Net_MASK=!IPSubnet! 
    Rem 判断是否存在值,以解决之后Net_MASK赋值为空的情况,保证Net_MASK存在值
    echo 适配器_子网掩码: !IPSubnet!  Net_子网掩码: !Net_MASK!
    IF not defined Net_gateway set Net_gateway=!DefaultIPGateway!
        echo 适配器_默认网关: !DefaultIPGateway!  Net_默认网关: !Net_gateway!
    IF not defined Net_dnsPra set Net_dnsPra=!DNSServerSearchOrder!
    echo 适配器_首选_DNS: !DNSServerSearchOrder!  Net_首选_DNS: !Net_dnsPra!
        IF defined dns2 set Net_dns2=!DNS2! &echo 适配器_配用_DNS :!DNS2!  Net_配用_DNS: !Net_dns2!
      )
    )
    echo. 
    echo. 
    echo ************************选择网络连接名称*****************************
    (for /f "tokens=1* delims=:" %%a in ('findstr /n .* 适配器_Index_Name.txt') do echo ID_%%a_%%b)>适配器_ID_Index_Name.txt
    REM 生成选择结构,添加序号ID_,避免纯查找数字序号会关键词的查找重复
    for /f "tokens=2-4 delims=_" %%a in (适配器_ID_Index_Name.txt) do (
    set NetConID=%%a 
      set NetConnectionID_Index=%%b
    set NetConnectionName_Index=%%c
    echo 适配器ID:!NetConID! 标号Index:!NetConnectionID_Index! 名称:!NetConnectionName_Index!
    )
    echo *************选择网络连接名称*****************IN %WindowsVer%***********
    :Set_Net_Ask
    Echo.
    echo.
    set /p NetConID=选择需要配置 适配器 对应 数字ID :
    if /i "%NetConID%" == "q" exit
    echo.
    echo.
    set NetConnectionName_Index=
    for /f "tokens=2-4 delims=_" %%a in ('findstr "ID_%NetConID%" 适配器_ID_Index_Name.txt') do (
    setlocal enabledelayedexpansion
      set NetConnectionID_Index=%%b 
    set NetConnectionName_Index=%%c
    echo 当前选择适配器ID:!NetConID! 标号Index:!NetConnectionID_Index! 名称:!NetConnectionName_Index!
    )
    if "%NetConnectionName_Index%" == "" (echo 选择选项超出范畴 ... &ping -n 3 127.1>nul &goto Set_Net_Ask) else (set net_interface=%NetConnectionName_Index% &echo 名称:!net_interface! )
    if exist 适配器_Index_Name.txt (del /a /f /s /q 适配器_Index_Name.txt) else echo 适配器_Index_Name.txt文件夹不存在
    if exist 适配器_ID_Index_Name.txt (del /a /f /s /q 适配器_ID_Index_Name.txt) else echo 适配器_ID_Index_Name.txt文件夹不存在
    ping -n 1 127.1>nul
    :Set_RamdonIP
    Rem 如果计算机可以连接互联网,判断网络DNS、网关是否可用,可以连接互联网则只改IP,启用当前区域DNS...
    Rem 获得可上网IP前三位,设置为随机IP前三位
    if "%Net_IP%" == "" (echo 设置Net_IP &set Net_IP=192.168.1.128) 
    for /f "tokens=1-4 delims=/." %%a in ("%Net_IP%") do (set IPa_=%%a.%%b.%%c)
    set /a IPb_=%random%%%255+3
    set "net_IPnew=%IPa_%.%IPb_%"
    echo 随机IP前三位[%IPa_%]  生成随机IP [%net_IPnew%]
    ping 127.0.0.1 -n 1 >nul 1>nul
    ping www.baidu.com &echo %errorlevel%
    if %errorlevel% equ 1 goto:Set_Net_Set_NoHave
    if %errorlevel% equ 0 goto:Set_Net_Set_Have
    :Set_Net_Set_Have
    Echo 当前计算机可以连通互联网...启用当前区域DNS...
    set Net_Ping=1
    set Net_IP_Diy=%net_IPnew%
    Rem 当前IP地址
    ping -n 1 127.0.0.1>nul
    goto DiyCHOICE
    :Set_Net_Set_NoHave
    Echo 当前计算机无法连通互联网...
    set Net_Ping=0
    set Net_IP_Diy=%net_IPnew%
    set "Net_MASK=255.255.255.0"
    set "Net_gateway=192.168.1.1"
    set "Net_dnsPra=202.100.192.68"
    set "Net_dns2=202.100.199.8"
    ping -n 1 127.0.0.1>nul
    goto DiyCHOICE
    :DiyCHOICE
    cls
    echo.
    echo ****************************IP快速切换程序***************************
    echo.
    echo 当前选择网络连接:
    echo  ID:%NetConID%  名称:%net_interface%
    echo.
    echo.
    echo --------------1.修改为随机IP---------------------%Net_IP_Diy%
    echo --------------2.设自动获取IP---------------------XXX.XXX.X.XXX
    echo --------------3.手动设网关IP---------------------192.XXX.X.XXX
    echo --------------4.查看网络设置---------------------%Net_IP%
    echo --------------5.设置路由器页---------------------%Net_gateway%
    echo.
    echo --------------r.重启网卡-------------------------x.退出程序---
    echo.
    echo.
    echo **** IN %WindowsVer% *******************************Tools By S34205****
    echo.
    echo.
    echo.
    if "%Net_Ping%" == "1" (echo 当前计算机可以连接互联网,启用当前区域DNS...) else (echo 当前计算机无法连接互联网,可能需要设置您区域DNS....)
    echo 随机的IP:[%Net_IP_Diy%]
    echo 子网掩码:[%Net_MASK%]
    echo 默认网关:[%Net_gateway%]
    echo 首选DNS:[%Net_dnsPra%]
    IF defined dns2 echo 备用DNS:[%Net_dns2%]
    echo.
    echo.
    ping -n 1 127.1 >nul 
    echo.
    :Diysetchoice
    set /p SetChoice_C= 请输入操作:
    Echo.
    Echo.
    IF NOT "%SetChoice_C%"=="" SET SetChoice_C=%SetChoice_C:~0,1%
    if /i "%SetChoice_C%"=="1" goto Static_ip
    if /i "%SetChoice_C%"=="2" goto DHCP_ip
    if /i "%SetChoice_C%"=="3" goto Diy_ip
    if /i "%SetChoice_C%"=="4" goto Look_ip
    if /i "%SetChoice_C%"=="5" goto Set_Moden_Web
    if /i "%SetChoice_C%"=="r" goto rebootnet
    if /i "%SetChoice_C%"=="x" goto END
    echo 输入的选择超出范围...
    ping -n 3 127.1>nul 
    goto DiyCHOICE
    :Static_ip
    echo.
    echo 设置随机IP:[%Net_IP_Diy%] ...
    REM netsh interface ip set address name="%net_interface%" source=static addr=%Net_IP_Diy% mask=%net_MASK%
    REM echo 设置IP成功...
    REM Echo 设置网关... 
    REM netsh interface ip set address name="%net_interface%" gateway=%Net_gateway% gwmetric=1 
    REM echo 设置DNS...
    REM netsh interface ip set dns name="%net_interface%" static addr=%Net_dnsPra% register=PRIMARY
    REM netsh interface ip add dns name="%net_interface%" addr=%Net_dns2% index=2
    wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Net_IP_Diy%),(%net_MASK%)
    wmic nicconfig where index=%NetConnectionID_Index% call setgateways(%Net_gateway%)
    wmic nicconfig where index=%NetConnectionID_Index% call setdnsdomain(%Net_dnsPra%)  
    wmic nicconfig where index=%NetConnectionID_Index% call SetDNSServerSearchOrder(%Net_dns2%)
    goto Set_IP_Done
    :DHCP_ip
    echo. 
    echo 正在设置IP为自动获取,请等待...
    REM echo 设置IP中...
    REM netsh interface ip set address name="%net_interface%" source=dhcp
    REM echo 设置网关成功...设置DNS中... 
    REM netsh interface ip set dns "%net_interface%" source=dhcp
    wmic path Win32_NetworkAdapterConfiguration.index=%NetConnectionID_Index% call enabledhcp
    wmic path Win32_NetworkAdapterConfiguration.index=%NetConnectionID_Index% call SetDNSServerSearchOrder()
    goto Set_IP_Done
    :Diy_ip
    set/p Net_IP_Diy=请输入IP地址 XXX.XXX.XXX.XXX:
    set/p Net_gateway=请输入网关地址 XXX.XXX.XXX.XXX: 
    set/p Net_dnsPra=请输入主dns地址 XXX.XXX.XXX.XXX: 
    REM netsh interface ip set address name="%net_interface%"source=static addr=%Net_IP_Diy% mask=255.255.255.0 
    REM netsh interface ip set address name="%net_interface%" gateway=%Net_gateway% gwmetric=0 
    REM netsh interface ip set dns name="%net_interface%" source=static addr=%Net_dnsPra% register=PRIMARY 
    wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Net_IP_Diy%),(%net_MASK%)
    wmic nicconfig where index=%NetConnectionID_Index% call setgateways(%Net_gateway%)
    wmic nicconfig where index=%NetConnectionID_Index% call setdnsdomain(%Net_dnsPra%)  
    wmic nicconfig where index=%NetConnectionID_Index% call SetDNSServerSearchOrder(%Net_dns2%)
    goto Set_IP_Done
    :Look_ip
    Echo.
    if "%LookNum%" == "2" (
    Echo 打开:控制面板-网络连接...
    ping -n 1 127.1>nul
    start control ncpa.cpl
    Echo 说明:开启环境延迟第二次Bat运行适配器属性不会改变,所以第二次次信息查看需要手动查看属性... &Echo.
    echo,前次%net_interface%地址的IP:%IPAddress% &echo,前次%net_interface%子网掩码:%IPSubnet% &echo,前次%net_interface%默认网关:%DefaultIPGateway% 
    ping -n 6 127.1>nul &goto Set_IP_Done
    )
    set LookNum=1
    set /a LookNum+=1
    Echo 查看网络连接%net_interface%的属性:
    set "w1=wmic nic where "NetConnectionID="%net_interface%"" get Index"
    for /f %%a in ('%w1% ^| findstr /b [0-9]') do set "n=%%a"
    set "w2=wmic nicconfig where "Index='%n%'" get DefaultIPGateway^,IPAddress^,IPSubnet"
    for /f tokens^=1-2delims^={^" %%a in ('%w2% /value^|find "."')do set "%%a%%b"
    echo,%net_interface%地址的IP:%IPAddress%
    echo,%net_interface%子网掩码:%IPSubnet%
    echo,%net_interface%默认网关:%DefaultIPGateway%
    ping -n 6 127.1>nul
    goto Set_IP_Done
    :rebootnet
    echo 重启网卡中...请稍等...
    ping -n 3 127.1>nul
    netsh interface set interface "%net_interface%" disabled
    netsh interface set interface "%net_interface%" enable
    goto Set_IP_Done
    :Set_Moden_Web
    Echo 需要修改%net_interface%IP为网关地址段[%Net_gateway%]...
    set /p SetChoice_Web=是(1) 否(2) 返回(3)  : 
    Echo.
    IF NOT "%SetChoice_Web%"=="" SET SetChoice_Web=%SetChoice_Web:~0,1%
    if /i "%SetChoice_Web%"=="1" goto Set_web_ip
    if /i "%SetChoice_Web%"=="2" goto Set_no_web_ip
    if /i "%SetChoice_Web%"=="2" goto DiyCHOICE
    echo 输入的选择超出范围...
    ping -n 3 127.1>nul 
    goto :Set_Moden_Web
    :Set_web_ip
    Rem 获得网关前三位,设置为IP前三位,如果不存在则创建
    if "%Net_gateway%" == "" (echo 设置Net_gateway &set Net_gateway=192.168.1.1) 
    for /f "tokens=1-4 delims=/." %%a in ("%Net_gateway%") do (set Set_web_IPa_=%%a.%%b.%%c)
    set /a Set_web_IPb_=%random%%%255+3
    set "Set_web_net_IPnew=%Set_web_IPa_%.%Set_web_IPb_%"
    echo IP前三位:%Set_web_IPa_%   后一位:%Set_web_IPb_%
    echo 正在设置%net_interface%为网关IP[%Set_web_net_IPnew%]......
    wmic nicconfig where index=%NetConnectionID_Index% call enablestatic(%Set_web_net_IPnew%),(%net_MASK%)
    echo 已经设置%net_interface%为网关IP[%Set_web_net_IPnew%]......
    goto :Set_no_web_ip
    :Set_no_web_ip
    Echo 当前网关为:%Net_gateway% ,正在打开 http://%Net_gateway% ....
    ping %Net_gateway% >nul
    start "%programfiles%\Internet Explorer\iexplore" http://%Net_gateway%
    ping -n 3 127.1>nul
    goto :Set_IP_Done
    :Set_IP_Done
    echo.
    echo OK,设置完成...
    ping -n 1 127.1>nul 
    echo OK,任务完成,返回选择菜单...
    ping -n 1 127.1>nul 
    GOTO DiyCHOICE
    :end
    echo **********************退出......................*********************
    Endlocal
    ping -n 3 127.1>nul
    exit

    继续分享一个

    
    @echo off
    for /f "delims=" %%a in ('wmic NIC where "NetEnabled='TRUE'" get MACAddress^,NetConnectionID /value^|find "="') do set %%a
    for /f "delims=" %%a in ('wmic NICCONFIG where "MACAddress='%MACAddress%'" get IPAddress /value^|find "="') do set %%a
    for /f "delims={," %%a in ("%IPAddress%") do set ip=%%~a
    for /f "tokens=1-4 delims=." %%a in ("%ip%") do set last=%%d
    echo;%ip%
    echo;%last%
    echo;%NetConnectionID%
    
    netsh interface ipv4 set address name="本地连接" addr=192.168.1.%last% mask=255.255.255.0 gwmetric=30
    netsh interface ipv4 add address name="本地连接" addr=192.168.2.%last% mask=255.255.255.0 gateway=192.168.2.1 gwmetric=1
    exit

    如果是小编自己用的话直接用

    netsh interface ipv4 add address name=”本地连接” addr=192.168.2.8 mask=255.255.255.0 gateway=192.168.2.1 gwmetric=1

    需要事先把这些ip、子网掩码、网关设置好,执行运行就可以了,方便粗暴。


Notice: Undefined variable: cao_ver in /data/wwwroot/www.lingkb.com/wp-content/plugins/riprodl/old.php on line 409